Residual Current Detection
TLB Series is a power solution specialized for Type B residual current detection. It can be used to detect different types of residual current, such as Smooth DC, Composite DC, Pulsed DC, or AC, etc.
In addition, the series can also be applied to the smooth DC residual current protection required by charging pile level II/III to fully protect the customer system. The design of multiple packages and original edge threading forms can also meet the different requirements of the PCB layout and installation.
The total Residual Current Detection : 4. Please check.
|Series||Vin(VDC)||Operating Temperature||Package||Rated AC Residual Current (mA)||Rated DC Residual Current (mA)||Footprint & 3D||Markings||Datasheet||Sample||Buy|
|TLB6-A1PD||5||-40~85℃||PCB perforation horizontal type||30||6||-||-||-||-||-|
|TLB6-A1PD||5||-40~85℃||PCB perforation horizontal type||30||6||-|
|TLB6-A1PV||5||-40~85℃||PCB perforation vertical type||30||6||-||-||-||-||-|
|TLB6-A1PV||5||-40~85℃||PCB perforation vertical type||30||6||-|
|TLB6-A1SVE||5||-40~85℃||PCB Pin vertical type (single-ph||30||6||-||-||-||-||-|
|TLB6-A1SVE||5||-40~85℃||PCB Pin vertical type (single-ph||30||6||-|
|TLB6-A1TDM||5||-40~85℃||PCB Pin horizontal type (two-pha||30||6||-||-||-||-||-|
|TLB6-A1TDM||5||-40~85℃||PCB Pin horizontal type (two-pha||30||6||-|
* For reference only. The detailed info please refer to the datasheet.