• 38. Does the suspension of the input ground pin influence the module? Is ground connection necessary?FAQ Like (0)
  • 37. Does the difference in test methods cause high ripple & noise?FAQ Like (0)
  • 36. The power source of dual output modules may produce high voltage. Why the ripple & noise is higher than that in individual tests of positive and FAQ Like (0)
  • 35. How does the module realize negative input?FAQ Like (0)
  • 34. The module fails to start up when the capacitive load is relatively large. How can this problem be solved?FAQ Like (0)
  • 33. How to eliminate the interference and high noise among power sources of systems?FAQ Like (0)
  • 32. Whether unbalanced load among the outputs is acceptable when customers are using multiple output products?FAQ Like (0)
  • 31. The module supplies power to the backlit LCD. What if the voltage drops upon startup?FAQ Like (0)
  • 30. The IGBT driver outputs low levels when the driving signal is supplied to the IGBT driver with the power. How can this be solved?FAQ Like (0)
  • 29. The module is interfered in the use process, and the data acquisition signal is bouncing. How can it be solved?FAQ Like (0)
Page 1/4,total 38,10 per page 1 2 3 4 Next Final   Go to Page