|
If unable to view, please click here |
| Design Could Be So Simplistic |
 |
|
|
| The CAN/RS485/RS232 can replace the traditional "transceiver+isolation chip/optocoupler+isolated power" design with a new module design integrating transceiver, isolation chip, high efficient DC/DC isolated power as one. |
|
|
|
| The CAN/RS485/RS232 modules can be used for inter-communications between devices on the industrial bus, satisfying transceiving and isolation functions. It is widely used in automotive, rail, textile, smart monitoring and smart meters. See Applied Solutions>> |
|
|
|
|
 |
Smaller in Size: The common integrating solution uses 25% more space |
|
Lower Consumption: Specialized power design for each type of module |
|
Longer Reliability Design: In long term reliability, electro-magnetic isolation chips are far better than optocoupler ones |
|
Safer Interface Protection: Specialized interface protection design |
|
Complete Reliability Testing: Seven big reliability platform systems |
|
Complete EMC Circuit Protection Recommendations |
|
|
Anti-fraud Notice |
|
| Type |
Product Series |
Product Name |
Bus Protection Voltage/Nodes |
Transfer Rate |
Output Channel |
Packaging |
| CAN |
TDx01DCAN |
General Single Channel CAN Isolated Transceiver Module |
110 Nodes: -36V～+36V |
0-1Mbps |
1 |
DIP8 |
| TDx02DCAN |
General Dual Channel CAN Isolated Transceiver Module |
110 Nodes: -36V～+36V |
0-1Mbps |
2 |
DIP12 |
| TDx01DCANNH2 |
High Speed H Type Single Channel CAN Isolated Transceiver Module |
110 Nodes: -27V～+40V |
40K-1Mbps |
1 |
DIP8 |
| TDx01DCANNH3 |
High Speed H Type Single Channel CAN Isolated Transceiver Module |
110 Nodes: -58V～+58V |
40K-1Mbps |
1 |
DIP8 |
| 485 |
TDx01D485 |
Low Speed Single Channel 485 Isolated Transceiver Module |
32 Nodes |
0-9.6Kbps |
1 |
DIP10 |
| TDx01D485H |
High Speed Single Channel H Type 485 Isolated Transceiver Module |
32 Nodes |
0-115.2Kbps |
1 |
DIP10 |
| TDx01D485H-A |
High Speed Single Channel H Type 485 Isolated Transceiver Module (Automatic Switchable) |
32 Nodes |
0-115.2Kbps |
1 |
DIP10 |
| TDx01D485H-E |
High Speed Single Channel H Type 487 Isolated Transceiver Module (Enhanced Version) |
256 Nodes |
0-500Kbps |
1 |
DIP10 |
| TDx11D485H |
High Speed Single Channel H Type 486 Isolated Transceiver Module(With Power Distribution) |
32 Nodes |
0-115.2Kbps |
1 |
DIP10 |
| TDx12P485 |
Low Speed Dual Channel 485 Isolated Transceiver Module |
32 Nodes |
0-9.6Kbps |
2 |
DIP24 |
| TDx12P485H |
High Speed Dual Channel H Type 485 Isolated Transceiver Module |
32 Nodes |
0-115.2Kbps |
2 |
DIP24 |
| TDx1IP485 |
High Speed Dual Channel Dual Isolation H Type 485 Isolated Transceiver Module |
32 Nodes |
0-115.2Kbps |
2 |
DIP24 |
| 232 |
TDx02D232H |
High Speed Dual Channel H Type 232 Isolated Transceiver Module |
/ |
0-115.2Kbps |
2 |
DIP8 |
| TDx01D232H |
High Speed Single Channel H Type 232 Isolated Transceiver Module |
/ |
0-115.2Kbps |
1 |
DIP8 |
|
Mornsun Exhibition Info:
Eletronica India 2014 Exhibition from Sept 23-25 at booth #2441 / Enova Paris 2014 Exhibition from Sept 16-18 at booth #K25 |
ANZ Distributors
DLPC Pty Ltd / Fairmont Marketing / Fero Ltd |
|
MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO., LTD.
No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou
Tel: +86(20)38601850 Fax: +86(20)38601272
Email: market400@mornsun.cn
Website: http://www.mornsun-power.com |
|
