Home>ABOUT>News&Video Center
SMD Compact Size, Active High Precision Signal Conditioning Modules - TE-T SeriesSep 20, 2019      view:

MORNSUN released a signal conditioning module TE-T series, which can isolate and convert the micro-signal accurately by extra-excitation.

The TE-T signal conditioning modules are designed to accept an input signals of either 4~20mA or 0-5V. The PCB design and SMD compact size package, not only make the whole system more reliable but also make mass production more efficient.

MORNSUN not only applies the power IC to the TE-T series, but also pre-packages the transformer, which further enhances the integration and reliability of the product.


Widely used in applications of instrumentation, industrial control, petrochemical, power monitoring.
A typical application: Flowmeter

General application block diagram:

In above figure, Sin1 to Sin4 are external input voltage signals, A0 to A1 are strobe signals, and Signal out is an external input signal received by the control system. In the circuit, the optocoupler realizes the isolated transmission of the strobe signal, the TE-T series realizes the isolated transmission of the signal and the isolated power supply, and the multi-channel signal strobe chip 4052 realizes the selective transmission of the multiplexed signal.

Two-port isolation (signal input and signal output) 
High linearity of 0.1% full scale 
Isolation test voltage 2kVAC for 60s 
Low ripple & noise: 30mVpp.TYP,20MHz
Extremely low temperature coefficient of ≤50PPM/℃ over entire range from -40℃ ~ +85℃ 
Full and zeros adjustment functions 
Compact size: SMD16 Package (21.00*14.50*6.10mm) 
ESD protection (IEC/EN61000-4-2 Contact ±4KV perf. Criteria B)

Please refer to the technical manual for specific product parameters:     TExxxxT

Product Number:

Series Input Signal Type Output Signal Type Vin (VDC) Vout (VDC) Isolation (VAC) Package Datasheet Sample
TE1660T 4~20mA 0~5V 5 None 2000 SMD16 - -
TE6660T 0-5V 0~5V 5 None 2000 SMD16 - -
More Press Releases