Home>ABOUT>News&Video Center
Isolated UART/SPI to CAN Module Series - TD5(3)USPCANAug 13, 2019      view:


With the popularity of CAN-application systems and the increasing demand for ECUs, the CAN bus has changed from the previous 2-channel to the demand of 4-channel or even 5-channel. 

TD5(3)USPCAN series integrated the microprocessor, CAN transceiver, power isolation, signal isolation in one module which can convert UART/SPI signal into CAN bus differential level so as to provide more signal interfaces and an isolation of 3000Vdc. 



This series is compatible with UART/SPI interface and can be directly embedded into the device with UART/SPI interface to expands more CAN communication interface to realize data communication between the device and CAN bus network.


Applications:
Widely used in applications of automotive electronics, charging piles, transportation (rail, automotive), instruments, communication, grid power, etc.

Application Diagrams:


Features:
- Built-in high efficiency isolated power supply
Two-port isolation test voltage(3kVDC)
Support two way data communication between UART/SPI and CAN interface
UART baud rate up to 921.6Kbps, SPI rate up to 1.5Mbps, CAN baud rate rate up to 1Mbps
Operating ambient temperature range: - 40℃ ~ + 85℃
Supporting transparent conversion, transparent tape identification conversion, custom protocol conversion
The bus supports maximum 110 nodes
Integrated isolation and ESD bus protection in one module


Please refer to the technical manual for specific product parameters:     TD5(3)USPCAN

Product Number:

Series Vin (VDC) Static Current Maximum Operating Current (mA) UART Baud Rate(bps) SPI Rate (Mbit/s) CAN Baud Rate(bps) No.of.Nodes Datasheet Sample
TD3USPDCAN 3.3 35 110 300~921600 0~1.5 5k~1M 110 - -
TD5USPDCAN 5 35 105 300~921600 0~1.5 5k~1M 110 - -
More Press Releases
0