Msn
Skype

Asia sales804
Europe sales801
America sales805

Home > Centro de soporte > Soporte on-lineSoporte on-line

Edited by：Veniamin Belkin Issued Time：4/7/2010 2:17:14 AM

What is the transient immunity (CMR) for such DC-DC as G_D-1W & H_D-1W Series and QA02. It is the most important limit for me to use them in fast MOSFET drivers. Thanks, Veniamin

Hi Veniamin, thank you for your questions. Our guys in the USA (Mornsun America, LLC) will contact you soon. Have a nice day!

Edited by：Anastassia Issued Time：10/15/2009 4:41:41 PM

Hello! Can you cross this Aimtec to your product? AM1L-0524S-NZ Need 50pcs for stock or with the short L/T Thank you very much for your help!

Yes, we will contact you soon. thanks!

Edited by：918662466675 Issued Time：9/24/2009 10:07:09 AM

We are using VRB2403D-40W - 8A module in our application. It is specified in datasheet that output capacitance should be 21000uF. That's quite a big value. It is specified as Max value. Then what is the typical value. My application is LED display board. The module is powering all the electronics except LEDs. For LEDs we are using another module

Hi Shankar,Swathi has also asked about this question before.We will reply you via email.

Edited by：JOHN Issued Time：8/25/2009 5:40:03 PM

Have a requirement for small DIP or SIP 3watt or so isolation DC to DC. Will need sample and cost. Need 9-12 input 5 VDC out, and 9-12 input 5,+12,-12 out. Thanks

Hi John, Thank you for the inquiry. Our sales at Mornsun America LLC will contact you soon. To contact them directly ~ sales@mornsunamerica.com www.mornsunamerica.com

Edited by：0098-913-195-9325 Issued Time：7/13/2009 10:19:11 PM

we need to dc/dc convertor with specification under vinput 85~130 vdc vout 24 vdc I out 1~2 A pleas guide to we

Thank you for your inquiry. We will reply via email very soon.

Page 1 of 1 ,A total of 5 records

First Prev Next Last

Ask

Company name and contact：	*
Contact：	*
E-mail：	*
Content：	*
	“*” Required